Cable & Wire, Electric & Energy Fair 2011

The major event dedicated to cables and wires industry, Cable & Wire, Electric & Energy Fair 2011, will be hold from 7 April, 2011 to  9  April, 2011 in CNR Expo Center, Istanbul. The exhibitors will display an assortment of products including cable and wires, cable accessories, insulating materials, electricity production machines and equipments. 

Cat6a UTP LSZH Cable

Features: 
Outer Jacket:    LSZH
Copper conductor:           0.56mm (AWG 23)
Operating temperature:   -20ºc to 60ºc 
Pair screen:      Aluminum laminated plastic foil, Drain wire AWG 26 tinned
Screen:            Copper braid
Electrical Characteristic:
Loop resistance:            ≤176 Ω/km
Resistance unbalance:  ≤2%
Insulation resistance :   (500v)≥2000 M Ω/km
Mutual Capacitance :       At 800 Hz Nom. 43 nF Ω/km
Capacitance unbalance:  Pair to ground ≤1500 pF Ω/km
Characteristic impedance:   1-100 MHz      (100±15)
                                         100-250 Mhz  (100±18) Ω
Propagation delay:           ≤427 ns/100m
Delay skew:                      ≤12 ns/100m                    
Test voltage:                    DC, 1 min core/core and core/screen  1000 v
Transfer impedance:       at 1 MHz   ≤20 mΩ/m
                                       at 10 MHz ≤50 mΩ/m
                                      at 30 MHz ≤100 mΩ/m

Shirley

Chigunng Cable Co.,Ltd

Siamese RG59 with Power Cable

Products Information

coaxial cable manufacturer

Rated Temperature 75 degree
RG59  
Conductor Solid Bare copper
Insulation Foam PE
Braiding Shield Solid Bare copper
Braiding consistency 95%
2C  
Conductor Stranded Bare copper
AWG 18/20/22
Insulation PVC
Jacket Pliability PVC
Electrical Characteristic  
1.0-100.0MHz Impedance (ohms) 75 ohm
Core dielectric(kv) ≥1.2
Insulation Resistance (Mohms*km) ≥5000
Jacket dielectric (kv) ≥3.0

Application
For security cameras

RG59 Coaxial Cable Electrical Characteristics
Type and Specification Core dielectric
kv
Impedance
Ω
Insulation Resistance
MΩ*km
Attenuation
Fre.dB/100m
Jacket dielectrict
kv
RG-59 ≥1.2 75+/-3 ≥5000 1MHz ≤1.75 ≥3.0
50MHz ≤5.71
100MHz ≤8.20
200MHz ≤11.61
700MHz ≤22.15
1000MHz ≤28.87

 

Shirley

Chigunng Cable Co.,Ltd

2 Cat5e, RG6 Hybrid Bundled Cable

Products Information

Description:
To meet the new hybrid and bundled cable requirements, we carry a wide range of hybrid cables to support multiple telecommunications applications in a shared sheath. This hybrid cable comes in 500′ per spool. CATV/DSS Quality please specify when you make an order.

Rated temperature: 75 degree
RG6(QUAD)  
Conductor Solid bare copper (CCS)
Insulation Foam PE
Shield AL Foil + AL Wire Braiding + AL Foil + AL Wire Braiding
Jacket PVC
2Cat 5e or 2Cat6  
Conductor Solid Bare copper
Insulation HDPE
Jacket PVC
Rip cord Per request
Outer Jacket PVC

Fire Alarm Cable

No-Plenum Product Description:

Bare copper conductors

PVC w/sun resistance, ripcord and sequential

footage marking

Rated temperature: 60

Foam Polypropylene insulation

Cabled construction

300V operation

Applications:

Power limited fire larm and communications cable for riser or non-riser applications. Fire alarm, smoke detectors, signaling, fire protective circuits

Shirley

Chigunng Cable Co.,ltd

Telephone cable J-Y(ST)Y

Application:
The installation cables are used for telephone and signal transmission and are suitable for permanent installation on and under plaster in dry and damp rooms and for permanent installation on external walls.

Description:
Bare coper conductor with a diameter of 0.6mm or 0.8mm, PVC insulation, Each 2 wires twisted to a pair, Pairs stranded to cable core in layers, Cable core wrapping, Drain wire with a diameter of 0.4mm in cables up to 10 pairs, 0.6mm with more than 10 pairs, Shield made of laminated aluminum foil, PVC sheath,grey. Max.Pair:100pairs.

Type codes:

J: Installation cable
Y: insulation or sheath of polyvinylchloride(PVC);(ST) satic shield; LG stranded in layers;

Introduction of RoHs

The definition and aim of the RoHS directive is quite simple. The RoHS directive aims to restrict certain dangerous substances commonly used in electronic and electronic equipment. Any RoHS compliant component is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). For Cadmium and Hexavalent chromium, there must be less than 0.01% of the substance by weight at raw homogeneous materials level. For Lead, PBB, and PBDE, there must be no more than 0.1% of the material, when calculated by weight at raw homogeneous materials. Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component. In the EU, some military and medical equipment are exempt from RoHS compliance.

Shirley

Chigunng Cable Co.,Ltd